Motormount for rc gliders on pylon for Turnigy Aerodrive 35XX motors

thingiverse

This is a motormount for my Multiplex Alpha vintage glider. Its designed for a 3536-1050 Turnigy Aerodrive motor and 12x6e folding prop, but you can use other 35 motors as longs as place of the holes are the same. You can place it between the aluminum mounts. You need the extra ring if you want some extra space for the axel may stick out of the motor or just drill a hole in to mount to give a sticking out axel some space. Or just cut off the axel. If the pylon is too long just cut it off. No problem. Use 3mm nuts and bolts to mount the motor and a drop of blue Locktite. I used PLA and I fly almost 2 years with this mount an never came loose or shows cracks. I never cut off noses of my precious vintage gliders so this is a way I can fly them with or without motor and leave them as they are. I used: https://hobbyking.com/nl_nl/turnigy-aerodrive-sk3-3536-1050kv-brushless-outrunner-motor.html?___store=nl_nl https://hobbyking.com/nl_nl/folding-prop-spinner-40mm-5-0mm-shaft-1.html?wrh_pdp=2&___store=nl_nl https://hobbyking.com/en_us/folding-prop-spinner-40mm-5-0mm-shaft-1.html?___store=en_us I used a piece of tierap to keep the props horizontal during flight. I drilled a 3 mm hole in the tierap and bolted it to the adapterend with the 3mm bolt that came with the folding prop spinner. I do not use the cone. Cut the tierap in a way that the props can go not further than horizontal.Otherwise the prop may not fold out when you throttle up and makes a nasty sound. Please like it if you are going to use it. Youtube: https://www.youtube.com/watch?v=LtGfj6xzB3Y&t=73s 08-nov-2018 119 views 122 downloads