Motormount for Turnigy 35XX Aerodrive SK3 for RC gliders

thingiverse

This mount is designed for the Turnigy 3536 1050kV motor and must be on top of a pylon made out of wood e.g. and the pylon is placed between the 2 wings. You must make the pylon yourself. The parts with 5 holes is 5mm thick and measures 40x40mm. The space between these parts about 5,5 mm. If its to wide just fill it up with plastic or wood. The 5 holes are 2 mm diameter. I use 3 mm bolts/nuts to secure the mount to the pylon. The part with 4 holes is 10mm thick. The front side of the mount is square so maybe you can make it more aerodynamic glueing balsa piece to it with CA glue and shape it in any form you like. After that you can use filler/primer and spraypainted. I will add extra rings if you need it: 10,12,14 mm. I designed it for the following gliders Carrera Trimmy, Robbe Rotario, Multiplex Domino. These vintage gliders are a bit heavy, like 1500-2000 gram including 2200 3S lipo and motorsetup. https://hobbyking.com/en_us/turnigy-aerodrive-sk3-3536-1050kv-brushless-outrunner-motor.html?___store=en_us Sorry for the wobbly printphotos but the Y axis doesnt work well :-( Happy flying!