Motorola Moto G4 & G4 plus xt1625 case

prusaprinters

<p>Originally published here: <a href="https://www.thingiverse.com/thing:3968897">Motorola Moto G4 &amp; G4 plus xt1625 case by tato_713 - Thingiverse</a></p><p>This case is valid for the models G4 and G4 Plus: XT1622, XT1624, XT1625, XT1641, XT1642, XT1644; but not the Moto G4 Play models.<br>Some of the models are designed for rigid materials and others for flexible ones.<strong>The models materials are not interchangeable</strong>, so pay attention to the file names. If you have any request on the design just ask me.<br>This is part of an update for the 2020 Valentine's Day, in which I add for most of my phone cases a "heart" version; a model with a hole in the back side with the shape of a heart.<br>For other phone cases check <a href="/tato_713/collections/phone-and-akin-cases">this</a>.<br>Por el día de la independencia argentina, el 9 de Julio, voy a actualizar algunas de las carcasas para celulares con una versión que haga alusión a la bandera argentina. Por la finura de algunas partes, este diseño sólo es posible en celulares relativamente grandes.<br>Here is the explanation of the files names:<strong>*Flex:</strong> made for elastic filaments like TPU. Tested on TPU. <strong>*Rigid:</strong> made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA.</p><p>I spend part of my time making these models, letting them available and free for everyone. If you want to support my work, you can contribute with me here:</p><h3>Print Settings</h3><p><strong>Printer:</strong></p><p>FLSUN Cube</p><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:</strong></p><p>Yes</p><p><strong>Notes:</strong></p><p>If you set the wall width to one filament line (0.4mm) and the infill overlap to higher amount (70~100%) you could have a rough wall surface.</p><p>Category: Mobile Phone</p>