Motorola Moto X4 xt1900 case

prusaprinters

<p>Originally published here: <a href="https://www.thingiverse.com/thing:4007451">Motorola Moto X4 xt1900 case by tato_713 - Thingiverse</a></p><p>Some of the models are designed for rigid materials and others for flexible ones.<strong>The models materials are not interchangeable</strong>, so pay attention to the file names. If you have any request on the design just ask me.</p><p>This is part of an update for the 2020 Valentine's Day, in which I add for most of my phone cases a "heart" version; a model with a hole in the back side with the shape of a heart.</p><p>2021 is the year when most of country started the covid-19 vaccination; that's why I added a design with the 2021 with the "0" as a virus silhouette and the "1" as a syringe.</p><p>For other phone cases check <a href="https://www.prusaprinters.org/social/120859-tato_713/collections/48429">this</a>.</p><p>Here is the explanation of the files names:</p><ul><li><strong>Flex:</strong> made for elastic filaments like TPU. Tested on TPU.</li><li><strong>Rigid:</strong> made for rigid (non-elastic) filaments like PLA, ABS, HIPS, etc. The entire model is a little bigger and the holes for the buttons are opened on the front side. Tested only on PLA.</li><li><strong>Banded:</strong> (<strong>h</strong> horizontal, <strong>c</strong> concentric) It has regular horizontal grooves in the bed surface, to make the finished texture more regular, avoiding irregularities on that part, and with a better grip.</li></ul><h3>Print Settings</h3><p><strong>Rafts:</strong></p><p>No</p><p><strong>Supports:</strong></p><p>Yes</p><p><strong>Notes:</strong></p><p>If you set the wall width to one filament line (0.4~0.6mm) and the infill overlap to higher amount (70~100%) you could have a rough wall surface.</p>