Mountable Cable Tamer for Netgear GS108PEv_3 8-port POE Switch

thingiverse

Update 2017-01-09: Noticed that one of the OEM screws on the 20mm high version does punch through into the side of one of the channels. Until I move the channel a bit, shorten the screw a few mm or use shorter screws to be safe. A 20mm tall and low profile 11.22mm tall mountable base with built-in cable channels so you can route the patch cables under the switch, keeping the switch stable on a shelf/table, and still see the activity LEDS on the ports. Cable channels are designed at 6mm wide and are sized based on the CAT6 patch cables I have on-hand. The organizer is designed to use the manufacturer-supplied mounting screws and the rubber feet are to remain in place on the housing to help hold everything together. I added some 1/4" clear rubber feet to the bottom of the pictured printouts to keep the setup from wandering. For the low-profile mount, the screws will need cut down to 11mm or alternate screws used (linesman pliers are sufficient for cutting down the OEM screws). I prefer the low-profile due to the decrease in material and print time. Otherwise, there is very little functional difference. I've included the original Sketchup skp files so feel free to remix as you like. If you have specific requirements for this setup, reach out and I'll see if I can accommodate. Print Settings Printer Brand: Prusa Printer: Prusa Steel Resolution: .3mm Infill: 20%