MPCNC compact filament spool holder

thingiverse

Filament spool holder built from leftover MPCNC components is simple to print with a 15 x 15 cm printer. A printed thread allows the fork to be rotated for precise print head position adjustments.\nFor 25mm IE Version of the MPCNC and 53 mm center holes with 53mm width spools\nUpdated with larger fork for spools up to 65mm wide, same centerdrum used\nIn action: https://youtu.be/9NKjN6Xf5pE?t=44s\nPrint Settings\nPrinter:\nHobbyking Fabrikator\nRafts:\nNo\nSupports:\nYes\nResolution:\n0.3\nInfill:\n10 - 40 %\nNotes:\nSuggestions\nFork: 10 % Infill, 0.8mm wall, triangle pattern, natural PLA "Das Filament" includes two M8 threads.\nDrum: 10 % Infill, 0.8mm wall, triangle pattern, natural PLA "Das Filament"\nClamp: 30 % Infill, 1.2 mm wall, triangle pattern, natural PLA "Das Filament" print with M3 holes flat and a little support in the center.\nPost-Printing\nDrill 8 mm holes afterwards for smooth rotation on bearings. Clamps have a small triangle to hold the M3 nut; do not reverse it or it won't screw down properly.