MRC/Academy GV2 Front Arm

thingiverse

Front A-Arm for the MRC/Academy GV2. I have removed the webbing from the arm and made a simple flat arm. It also allows you to play around with different infills/wall thicknesses to adjust flex and weight. There is a lot happening in the arm itself in terms of reaming/tapping. The inner hinge pivot should be reamed with a 3 mm drill bit. The outer hinge pins should be reamed with a 2.5 mm drill bit - however, they are not through holes so be careful when doing this to not drill through the pin retainer on the front side. The shock mounting holes should be tapped with a M3 tap. The hinge pin retainer screws in the kit are self tapping screws so you can either use them as-is or tap and use a M2 screw with a washer/oversized head.