MTB mudguard brackets

Hi MTB friends!Every owner of a mountain bike probably knows the problem: The stable mounting of mudguards is really difficult, because the manufacturers of the bike have not provided a solution for it.Fortunately, we are Maker so take measurements, fire up Fusion360 and do it yourself!I tried to make the bracket as universal as possible. It attaches to the bike using cable ties only, as you can see in the pictures. At the rear bracket is an elongated hole so that the distance between the fender and the rear wheel is adjustable. The blue framed angle was included with the fender.To secure the bracket against slipping and to protect the frame I have made myself rubber pads from an old bicycle tube, which I glued to the areas facing the frame. The edges were trimmed after the glue had dried.This is the mounting for the mudguard of the front wheel:The tube diameter of the front clamp (on the suspension fork) is 36mm, on the attachment to the rear frame (rear wheel) it is 17mm. The cable ties I used are 4.6mm x 200mm.  The brackets are now installed for about 9 months on my bike and keeps what it promises. It has become very stable. To improve the optics I will soon exchange the white cable ties against black. Probably these are also more resistent to solar radiation over time.Printing the parts is really easy. You can see my recommended printing direction in the pictures. No supports are needed!If any questions come up, feel free to send me a message. I will be happy to help.Have fun with it!