MULTI-Module JR style Case Taranis Flysky th9x REMIX

thingiverse

Work-In-Progress cause not printed yet. I noticed a problem when slicing file "Cover_glue_bind.stl" with slicer and uploaded a repaired one, all other stl files should work. Also noticed a little cosmetic error at the joint of all glued versions after slicing, but after glueing nobody can see it and the function is given, so I think everyone can live with it. Uploaded repaired versions of the one piece covers, Cura was kidding me and the autorepair function has repaired a lot of holes in the surface from altering the original file. Now I sliced them with Slic3r and got a lot of errors, so I used a few repair routines to repair the stl's. I have the 4in1 multiprotocol module as shown in this thread:https://www.rcgroups.com/forums/showthread.php?2165676-DIY-Multiprotocol-TX-Module from Banggood:http://www.banggood.com/2_4G-CC2500-A7105-Flysky-Frsky-Devo-DSM2-Multiprotocol-TX-Module-With-Antenna-p-1048377.html I'm using it with my Taranis + and 3D printed one of the first cases for it, but that case has some downsides like a too low antenna position so that the antenna compete for the room with the metal handle on top back of the radio, also it was a pain to bold the SMA connector. This case has 30mm neck to raise the antenna position, for a more ease SMA mounting without the chance of a twisting mount I've added a support for the SMA inside the neck. The source from what this Remix is made has plug from TPU or Ninjaflex to reach the AVR-ISP ease, but most people (and me) haven't that filament or don't wont that plug, so I made virsions with and without that plug. You have also the option for the "MULTI" sign of the source, a clean surface or a hole for the bind button. (Button and dial isn't needed anymore when the modul is running in serial like with Taranis + and a new OpenTX) I like to print those things from ABS, but the long neck isn't easy to print and will need supports inside when printed in ABS as a single part and inner supports are allways a pain, so you has the option for a cover made as one single piece or to print the neck separately and glue it later together. For the very first update you will need the AVR-ISP to swap the bootloader with this one:https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/docs/Advanced_ATmega_Serial_Uploader.md Later you can use your normal serial connection via FTDI adapter but then you will need the bind button as well to initiate programming of the module. So you see if you hold the bind button or not makes a difference how to update in future. Let me know if you like that Remix and please report if you made one and how it works for you.