Multi-Tool Holder with Belt Clip

prusaprinters

<p>8/18/21 Edit: I updated the design with several small improvements.</p> <p>I designed this case to hold my multi-tool and clip to my belt. Make sure that you measure your multi-tool and scale all three dimensions of the model before printing. You multi-tool may be a different size than mine! This is meant for use multi-tools that are v-shaped.</p> <p>My multi-tool was about 55mm at widest end and 35 mm at the narrow end.</p> <p>The full print with 20% infill used about 72g of filament. The print time is 10 hours and 30 minutes with 0.2mm layer height</p> <p>I made the cover from duck-tape and velcro.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>0.2mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20</p></div> <p><strong>Filament:</strong> Hatchbox PLA Black</p> </p></p></p> Category: Tool Holders & Boxes