Multicolor cell remix (for monocolor printer)

thingiverse

<h3>Multicolor cell model redesigned for monocolor printers</h3> This model has been adapted from the original one that has been designed for Palette. Unfortunately it's almost impossible to print it correctly without touhing parts and adapting colors Take a look at the original design here <a href="https://www.thingiverse.com/thing:2485063">Multi-Color Cell Model</a> <ul> <li>A-Centriole : Reoriented part, no need to flatten it, centered</li> <li>B-Nucleous : Reoriented part, no need to flatten it, centered</li> <li>C-Nucleolous : Reoriented part, no need to flatten it, centered</li> <li>D-Golgi : Reoriented part, no need to flatten it, centered</li> <li>E-Mitochondrion-1 : Reoriented part, no need to flatten it, centered (its the taller one)</li> <li>F-Mitochondrion-2 : /\ 0.2 nozzle needed ! lack of detail else and fail/bad print. Reoriented part, no need to flatten it, centered (its the smaller one)</li> <li>G-Endoplasmic_Reticulum : /\0.2 nozzle (amy be 0.4 with 80% flowrate), need to be very thin to fit actual design (working on)</li> <li>H-Outer : Removed endoplasmic reticulum shape from the mesh, become useless. Reoriented part, no need to flatten it, centered (-15% print time / original)</li> <li>I-Lysome : Two of them needed to be cliped as original, best for well fiting. Third is to stick. Reoriented part, no need to flatten it, centered</li> <li>J-Inner-1 : Inner cut in twice, this is part one. Reoriented part, no need to flatten it, centered (working on)</li> <li>K-Inner-2 : Inner cut in twice, this is part two. Reoriented part, no need to flatten it, centered (working on)</li> </ul>