Multifunctional Curve Board

thingiverse

Check out the pictures which show everything clearly. The curved board can be used in multiple ways: as paper (for things like coupons, letters, and bills), as an organizer, or as a tablet/phone stand that adjusts to any angle you need. You can also use it as a bottle dryer or a fruit rack. Any ideas or recommendations are welcome! Here's how the prints were done: No model requires support to print - just plug in these settings for the pictures you see: Fill: 10%, Plastic: 1.75mm PLA, Layer Height: 0.27mm, Number of shells: 1, Feedrate: 80 mm/s, Travel Feedrate: 56 mm/s. What should you print? If you're making a coupon organizer, start with base_100x120.stl, then add 1 or more divider_45x120_diamond.stl. A tablet stand requires 1 base_100x120.stl and 1 divider_45x120_diamond.stl. For a bottle dryer, you'll need 1 base_100x120.stl, 2 divider_45x120_diamond.stl, and 1-3_sticks_8x120mm.stl. The STL files explain what each one is: base_100x120.stl - A single base with a radius of 100mm, width of 120mm. divider_45x120_diamond.stl - A divider with height=45mm and width=120mm stop.stl - A stop used to keep the tablet from slipping 3_sticks_8x120mm.stl - Three sticks for the bottle dryer.