My Customized omni wheel prototype

thingiverse

I'm happy to help you with the customized version of Thingiverse design: 792347, created using the Customizer app. To use this model, follow these steps: You will need to set the following parameters: Set the diameter of the hub side holes to 3 mm. Set the flat percentage of the hub to 50%. Determine the number of spinners you want (choose between 1 and 10). Specify the margin from each spinner hole in radial direction as 0.5 mm. Select the outside diameter of the oring as 13 mm. Define the radius of the margin around each spinner as 0.3 mm. Designate the inside diameter of the center hub hole as 3 mm. Pick the inner diameter of the oring at 8 mm. Decide on the height of the split ring as 3.3 mm. Establish the distance between side holes of the hub as 6 mm. Choose the inner diameter of the split ring as 32.5 mm. Set the outside diameter of the split ring as 38 mm. Indicate the angle for the margin from each spinner in radial direction as 0.2 degrees. Specify the count of the side holes on the hub, choose between 1 and 10.