NAKED GOpro 85x CineWhoop v2

thingiverse

** update May 2020 ** Overview on printed pieces: https://youtu.be/9DAVROSF4Zk ** update MARCH 2020 ** You may have to go to the THING FILES to see all the files. "Download All" seems to be an issue with thingiverse where you don't get all the files. the latest udpates are these 4 files: HARD_v2_Case_Buttons.stl (if you use 2 buttons on the back with the LED) HARD_Case_LCDScreen.stl (if you use the front LCD screen) TPU_Adjustable_SOFT_HD.stl (for 85x HD) TPU_Adjustable_SOFT_NON-HD.stl (for non hd 85x) These will allow you to use either buttons or a screen. And the rear TPU part will allow you to change the angle. You WILL NOT SEE DUCTS or the camera with these files. **UPDATE JAN 8 2020 *** Cleaned up the files. Changed the arms to soft mount versions. Should help with any jello. There's 2 rear arms. 1 for regular beta 85x and the 85x HD. There's a small dimension difference at the rear. I added holders for 0, 5, 15 degrees uptilt. Using the new rear arm you can use any of these tilt cases. HARD_v2 (2 files) is the case that accommodates buttons and LED. how-to video here: https://youtu.be/um8lrao-Oo8 *** END UPDATE *** I've polished it up a bit, and if you wire it right you can move the gopro from whoop to whoop. In the photos all yellow parts are TPU. The main case you can print in TPU - I have not tried this. I used PLA to test and PETG for the final. It's tilted at 15 degrees. The little cylinder at the top is m3 sized so you can use a screw and a nut. I'd use nylon screws so as to not damage the PCB. I just used a zip tie. There's 2 sets of arms. 1 rear arm is for the 85x HD which has a thicker section for the hook. Another is a "loose" set in case your tolerances are too tight. It's 0.2mm thinner. I included a lens protector if you're worried about your gopro lens. And an ND filter holder. The rear curved part is for the ribbon cable. I used strips of Blenderm to hold it there.