Nano 33 Sense Digiadapter for DJI Goggles

thingiverse

This is a remix of the mount that allows using the Digiadapter to hold an Arduino Nano 33 used for head tracking. Changes from the original: 1) reinforced the tabs 2) flipped the board over, so that the lights face outwards 3) added a hole for the "sense" so you can reset with your hand I used the pin header that came with the Nano, cut down to 9 pins, to attach to the existing port intended for the analog receiver. Pin 1 is V and pin 3 is GND. I cut off the remaining pins and used heat shrink to prevent any unintended contact. See photo. This is the open-source project to create the head tracker: https://github.com/dlktdr/HeadTracker/wiki I used the "para" second board on my transmitter to eliminate the need for a headphone wire connecting the headset to the radio. So there are two versions of the model, one with a headphone hole, and one without.