Nano Drak Boomer DJI FPV Nose

thingiverse

Note that this has not flown yet, so use at your own risk. Note!!: CG is actually nose heavy now. The assembly, with DJI unit, is 132grams. I would print this as light as your dare. I got an Emax 2206 motor in mine and will probably now find a more beefy motor. I would not use this on the non-boom version. Custom nose for the Nano Drak Boomer to fit a DJI FPV setup. Printing Instructions: This can be a little tricky to print. The main section really wants to warp off the bed as it has minimal contact. I used a 5mm, 3 layered prim, which enabled me to print it with GreenTec Biopolymer filament. For the tray, you may, depending on your printer, need to sand it a little. Do not force it in as you won't get it out again. It needs to slide in smoothly, so if you meet any resistance, stop, sand it a bit more, It is designed with 0.25mm tolerance, so this will be less of an issue on high performance printers. I've also included a cutting template. Note that this is different from the pictures, with the longer cutout in the bottom, which is how much I eventually ended up having to cut out. I would cut it like I did mine at first and then once you got the hole through to the battery bay estabilished, you can then extended it to the full length.