nano FPV Hexacopter V2

thingiverse

V2 of nano FPV Hexacopter for in and outdoor flight. (prototype) It flights very well and stable even on windy days, perfekt for indoor and garden FPV-races. use cleanflight and start with default PID settings. use a rubber band to attach the lipo. Recommended parts: -6x 8520 brushed motors (8,5mm brushed motors) ( https://hobbyking.com/en_us/brushed-motor-4-pcs-per-set.html?affiliate_code=MLKIJZYPKWCRBPX&_asc=8061146539 ) -6x 35mm 4-Blade- Propellers (3ccw, 3cw) ( https://hobbyking.com/en_us/35mm-4-blade-propeller-2ccw-2cw-orange.html?affiliate_code=MLKIJZYPKWCRBPX&_asc=8924148853 ) -750mAh 1S Lipo ( https://hobbyking.com/en_us/turnigy-nano-tech-750mah-1s-35-70c-lipo-pack-walkera-v120d02s-qr-infra-x-qr-w100s.html?affiliate_code=MLKIJZYPKWCRBPX&_asc=1469939618 ) -6CH Micro Rx ( https://hobbyking.com/en_us/orangerx-r614xn-dsm2-dsmx-nano-indoor-diy-receiver-with-cppm-pwm-spektrum-jr-multirotor-quadcopter.html?affiliate_code=MLKIJZYPKWCRBPX&_asc=1681037687 ) -Naze32 brush micro flight controler ( https://hobbyking.com/en_us/naze32-brush-32bit-flight-colntroller-for-indoor-fpv.html?affiliate_code=MLKIJZYPKWCRBPX&_asc=8514182094 ) -mini FPV camera ( https://hobbyking.com/en_us/vm275t-5-8ghz-25mw-48ch-ntsc-pal-mini-vtx-600tvl-fpv-camera-micro-fpv-cloverleaf-antenna.html?affiliate_code=MLKIJZYPKWCRBPX&_asc=3280350457 ) Print Settings Printer: Prusa i3 Pro B Rafts: No Supports: No Resolution: 0.1 - 0.15 Infill: 0-100% Notes: The Hexa has hollow chamber construction with 0.8mm wall thickness. I print it with a 0.4mm nozzle and 100% infill.