NATO/STANAG 40mm thread to twinn DAR adaptor v1.0

thingiverse

Twin DAR filter adaptor for 40mm NATO/STANAG thread. Used for example in PANORAMASQUE. https://www.honeywellsafety.com/Products/Respiratory_Protection/PANORAMASQUE.aspx?site=/europe To be used with two standard DAR filters. For single DAR filter vesion look here: https://www.thingiverse.com/thing:4285159 This design solves common problem with many others design of twin filter adaptors - random position of filters when adaptor is screwed-in. At beginning of the thread there is a place/slot to press-in standard soft O-Ring of size 30x3mm (30mm is internal diameter of O-Ring). Elasticity of the O-Ring gives a neccesary space to turn adaptor into proper position. See pictures attached. Adaptor slot cross-section is little more than half of circle - so O-Ring is locked in place nicelly. The filter cones are design according to ISO 5356-1:2015 standard, with FDM 3D printing technology in mind. This version need no support. There are many misunderstandings regarding the NATO/STANAG thread vs standard RD40mm. Good explantions you can find here: https://gasmaskandrespirator.fandom.com/wiki/Thread:11144 and here https://youtu.be/lXPNuyp4ek4 --- Print parameters: - Material - PET-G - Nozzle max 0.4mm - Layer max 0.2mm - Perimeters - 5 - Top/bottom layers - 5 - Infill density - 40% - Infill pattern - Concentric or Grid - Seam position - Random - Solid Infill Threshold Area - 70mm2 For best result with O-Ring slot it's recommended to use thinner layer for first 2mm. The 0.1mm is perfect. For detail ask in comments. --- Files in project: - <b>NATO_STANAG_40mm-2xDAR_adaptor_v1.0.stl</b> - adaptor - in ready to print position --- Project is continuously improved in close cooperation with: Warsaw University of Technology Faculty of Automotive and Construction Machinery Engineering. Print and use at your own responsibility.