Nema 17 Pancake Bracket

thingiverse

A simple bracket to hold my Nema 17 Pancake motor, which I use for my Belted Extruder V2. for 1.75mm Bowden. If you use a full sized normal Nema 17, you might want to take a look at my Nema 17 motor mount bracket It might seem fragile, but the rounded edges makes for a really strong piece of a small bracket :) BOM: 5x m3 nuts 1x m3 20mm screw to lock the Nema 17 in place. 4x m3 screws with a length to mount to your printer etc. If your m3 nuts are loose, I suggest you use a drop of glue on them, to avoid them falling out when trying to attach the bracket. Print Settings Printer: JennyPrinter Rafts: No Supports: No Resolution: 0.25 Infill: 20 Notes: I printed it at 0.25 layer height using 0.4mm nozzle and 3 perimeters... I guess 2 perimeters would be fine, and you can use higher layers as well. Might distort the nut-cutouts but nothing serious.