Neopixel Prototyping Board

prusaprinters

<p>This is a prototyping board designed for making patterns for NeoPixel devices.</p><p>I'm working on a project using a full strip of NeoPixels, but I wanted a smaller prototyping kit so i didn't have to mess with an entire strip just to work on some patterns. This board includes mounts for an Arduino Uno, a Adafruit NeoPixel stick, and a mini breadboard to hold a capacitor and provide tie-in points for a secondary power supply.</p><p><strong>NOTE:</strong> If you're running all pixels at full brightness you may exceed the power limits of the Arduino board. Be sure to use a secondary power supply if you need one, or if you're unsure.</p><p>There are four designs available:</p><ul><li>Original</li><li>Original with Mounting Holes</li><li>No Breadboard</li><li>No Breadboard with Mounting Holes</li></ul><p>The "no breadboard" version is useful if you're using a prototyping shield or if you want to link your NeoPixel project to a larger breadboard. Both the original and no breadboard versions have mounting hole options if you want to attach the protoboard to another board or project.</p><p>You will need 4 M3 bolts and 2 M2 bolts to attach the Arduino and NeoPixel stick, respectively. You can use a tap but the bolts should be able to form their own threads.</p><p>The mounting hole spacing is 120x65mm for the original version and 80x65mm for the no breadboard version.</p><h3>Parts List</h3><ul><li>Arduino Uno</li><li><a href="https://www.adafruit.com/product/65">Mini Breadboard</a></li><li><a href="https://www.adafruit.com/product/1426">Adafruit NeoPixel Stick</a></li><li>1 1000µF Capacitor</li><li>Hookup Wire (Solid)</li><li>4 M3-6 Bolts</li><li>2 M2-6 Bolts</li></ul><p>Category: Electronics</p>