Neptune 3 Pro - Cable holder for silicone spacers

thingiverse

Hello, that is the needed part for the upgrade to silicone spacers (on the left back) on the Elegoo Neptune 3 Pro. I tested this one on my Neptune 3 Pro with Extrudr Greentech Pro (heat resistance up to 130 degrees celsius referring to the data sheet) with heatbed 70 degrees celsius for PETG printing. No problems so far. Just look at the dimensions of your spacers (D= diameter & H = height and choose the correct stl file). If the dimensions you need are not available just let me know and I will upload them as fast as possible. I will do an ABS/ASA print with 100 degree Celsius test print and see how it performs. I would recommend printing this part from Nylon or ASA but other materials could work fine as well. I recommend using adaptive layer heights , supports with .2 distance and the temperature depending on your filament choice. Its not the best design but pretty functional for me. Please let me know if you have improvements for this part or need other upgrade designs. NOTE! : I had Autobed leveling issues trying to bring the bed mesh numbers close to zero. When I put the number to between +/- 0.10 and +/- 0.25 the first layer was pretty nice. Just in case you face the same problem. Used Screws: M4x25 Same head Like the original ones works fine. Thank you and happy printing Yannick