Nerf MEGA Explosive Tips - Party Snap Foam Dart Tips

thingiverse

For some added MEGA explosive fun during your next Nerf War, I've made a 3D printable replacement tip for foam MEGA darts that holds "party snaps" that explode on impact! The tips are printed in three pieces: the tip, the screw mount, and the head that holds the "party snaps". All three pieces are supplied as individual STLs, so you only need to print what you need for replacement components. I've tested the darts up to 35 feet away from a smooth surface (garage door) and they still explode on impact. I haven't had a single jam as the tip fits perfectly with the foam dart. There are STLs for both the solid head as well as the head with holes. I highly recommend only printing the aerated head as they are much louder and fall at impact instead of bouncing back 6-12 feet. Print time @ 0.2mm: 20 minutes per set Disclaimer: DO NOT SHOOT THESE AT PEOPLE OR ANIMALS The STL for the standard Nerf Dart explosive tips is available at: http://www.thingiverse.com/thing:2148142 For instructions and testing results, please view the video at: https://youtu.be/ybZklpjmO1I Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: Print Settings: Layer Height: 0.2mm Wall Width: 0.4mm Wall Count: 3 Top/Bottom Layers: 6 Infill: 20% Post-Printing Carefully remove the tip from a MEGA Nerf bullet/foam dart (the glue they use is very easy to pry away). Drop the tip into the head, add 2-3 "party snaps", screw on the mounting screw, screw the explosive Nerf tip into the foam dart, load your gun, and ENJOY! Check the YouTube video for more instructions and the testing results of the MEGA dart poppers!