Nerf Roughcut Full_Tactical - STOCK - tilted
thingiverse
Nerf Roughcut Full_Tactical - STOCK - tilted This is the tilted / angled Stock for the "Full Tactical" Nerf roughcut GRIP Mod here: https://www.thingiverse.com/thing:5427465 This Stock enables up to three 16x dart holders with picatinny rails and two "speedloaders". Side-dartholder are unique for left and right. You can find the amazing speedloaders by Velocisniper here: https://www.thingiverse.com/thing:4636793 These speedloaders are friction fit, if they may prove to lose, use some elctric tape to tighten them up. Print in 0.16mm or less recommended. Infill 20-40%. Mine are printed in ABS in 0.12mm. Assembly: use M2 / m3 self tapering screws 13 / 16mm long AND / OR glue as you see fit.
With this file you will be able to print Nerf Roughcut Full_Tactical - STOCK - tilted with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Nerf Roughcut Full_Tactical - STOCK - tilted.