Nespresso Aeroccino

prusaprinters

<p>If your Nespresso coffee machine, like Nespresso Expert&amp;Milk, brakes down you can easily reuse the Aeroccino as it's directly powered by mains.</p><p>How:</p><ol><li>Disassemble the machine by removing all screws, save them for later. Remove the power cord and save it.</li><li>Remove the rubber feet with a plier and save them for later.</li><li>Cut off the Aeroccino bracket from the main plate and remove the remaining parts with a plier and clean it nicely so the edge is flush.</li><li>Print the base and wirelock, clean the holes with a drill bit.</li><li>Prepare the power cord with three 4.8mm flat pins. The originally part is marked with “N”/"L"/"Ground" or use the enclosed photo.&nbsp;</li><li>Assemble the parts using the power cord, 5 screws and 3 rubber feet.<ol><li>The power cord is a little bit tricky as the wirelock and connectors are on two different parts but it's enough space to have a good margin on separate wires.</li></ol></li></ol>