Nexus Pro stock extender (Replacement spring cap for Dart Zone Nexus Pro)

cults3d

These files are stock extentions for the Dart Zone Nexus Pro, in replacing the springcap. The length the stock can be extended with the original stock tube and springcap is suitable for most people. However there is no provision for those above average height requiring longer positions for the stock. This stock extender provides 3 more positions that the original stock can be set to, giving the length needed for people up to 2meters tall. Each part has a 2 letter code in the file name. The first letter is L for loose, or T for tight. These two sets refer to the tolerances of each part. I recommend you try the tight version first and if it doesn't fit, go to the loose version. This is to account for the tolerance differences between different 3d printers. The second letter is for the power L low, M medium, H high, and refers to the position of the spring rest. This adds or removes spring pre-compression so that you can change the power of your Nexus Pro to suit the games you play. The Medium version has a slight increase over the original springcap, the low power brings it down to roughly 'superstock' performance and the high power brings it up quite significantly. As different darts/spring/breach/barrel combinations are endless, I cannot say for certain what your muzzle velocity will be, however as a rough estimate I achieved 30m/s with the Low, 45m/s with the mid and 55m/s with the high. In addition to this there is included a spring spacer that can be used with the low or medium versions to create an interim power to more finely tune your . You cannot add this to the high power version as that version is already at the maximum. This gives you 5 total positions to let you dial in your muzzle velocity to match either site limits or the optimal performance of certain dart/barrel/scar combinations. I made a video showing the original version of this design along with my other designs for the Nexus Pro: (Unfortunately the video was deleted.)