NIKON TMD MICROSCOPE STAGE PLATE

thingiverse

TURNING AN 30+ YEAR OLD MICROSCOPE INTO A MORE MODERN MICROSCOPE. During the proces of adding a DIY custom made microscope scanning stage to my microscope, I decided to also make some modifications to some of its parts. In this case I fixed the "stage plate and specimen clip". More info about the full project:https://medium.com/micrograph-stories/turning-an-30-year-old-microscope-into-a-more-modern-microscope-2837ef78991d#.xiuaxivoq Stage plate and specimen clip : The microscope “originally” came with no specimen clip that would fit nicely with it, and I always struggled with the one I had. The one that I had did not work cause the stage plate that came with the microscope was a few mm to high and the connection points for the screws did not match the holes in the stage. Resulting in some weird problems such as not keeping the slides nicely in place. Also the clearance of objectives did not always go without problems since if to long they would hit the plate at the bottom if it was not centred right in the middle of the stage plate opening. So it needed to be bigger not a 20mmm diameter opening but more like 60mm large diameter opening. So this means the stage plate should be re designed in a way it would be exactly as high as the top of the stage, it should hold the glass slides without the use of an extra specimen clip, have more clearance for the objectives to switch in the revolver, plus it would be a big advantage if the plate with the specimen could turn 360 degrees. These ideas and specs resulted in the following stage plate. The only thing that I will do in the next update, is to make the extruded lowered part for the glass slide with less tolerance so it will fit in exact so there is no chance of moving during the scanning process. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: No Supports: No Resolution: .2mm Infill: 100% Post-Printing