NR200 PSU lift mod

thingiverse

This mod is to fix the NR200 clearance for SFX-L power supplies. SFX-L PSUs are compatible with long GPUs, however, unless you have custom PSU cables the PSU will push down significantly on the GPU causing sagging/bending. This mod allows you to mount to the PSU about 12mm higher than what's normally supported. In my case, my sfx-l psu cables don't touch my GPU anymore. Print sideways (there is no need for supports), brim may be required depending on your setup. Risers are different. You will need one of each. The riser with the flap on the side is meant to be next to the motherboard, it's there to prevent the bracket from latching off and potentially hitting the motherboard. The rectangle fixture is optional. PETG recommended for higher material strength.