Nuka Cola Clock (MMU)

prusaprinters

<p>This is a clock based on a super-large bottle cap from a Nuka Cola bottle of Fallout games fame. I started with the model by techoutreach](<a href="https://twitter.com/tech_outreach73">https://twitter.com/tech_outreach73</a>) here on <a href="https://www.prusaprinters.org/prints/10468-nuka-cola-clock">PrusaPrinters</a> but modified it to:</p> <ul> <li>integrat the lettering into the shape for MMU</li> <li>print face down on the bed and shelled the whole model to use significantly less material;</li> <li>integrate a mount for a digital clock movement</li> </ul> <p>Since @tech_outreach was kind enough to provide a STEP file of his model, so shall I =)</p> <h3>Print instructions</h3><p>I chose to use supports for the edges of the face for a nice, gradual curve. This left me with some sanding to do. I used 220, 800 and 2000 grit sandpaper to smooth out the transition from the clock face to the sides. Then, I applied a single coat of spray polyurethane. I was quite blown away at the resulting shine!</p>