NZXT H510 HDD vibration mount
thingiverse
Anti vibration mount for the NZXT H510 case. If you don't have these special screws that are shown in the pictures than print the files with the name _small_screw however I did not test those. the ending _46 and _35 refer to the diameter of the mounting holes. if you want to install 2xHDD than print one of each, if you only want to install 1 print only the one with _35. before mounting you should tap the 3,5mm hole to M4 DO NOT USE PLA, HDD get warm and will distort the springs. PC or PA is recomended. A fan can be added by drilling two 3,5mm holes into the outer wall and using strandart plastic fan mounting screws for 2xHDD you need: - 4x M4x60-80 screws - 8x HDD screws (some funny sized threats) ~13mm long or short normal ones for 1xHDD you need: - 4x M4x20-40 screws - 4x HDD screws (some funny sized threats) ~13mm long or short normal ones
With this file you will be able to print NZXT H510 HDD vibration mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on NZXT H510 HDD vibration mount.