Official ODROID-C4 case modded to fit a 40mm fan

thingiverse

Case compatible with a 40mm fan for the single board computer Odroid-C4 from HardKernel This case is directly derived from the official Odroid-C4 case that can be found on the official wiki (https://wiki.odroid.com/odroid-c4/hardware/hardware) With the following mods for a better use and 3D printing experience: - I added 8mm in height to the top cover in order to fit a 40mm fan INSIDE the case, which is (IMHO) much nicer than above, despite the bulkier assembly - removed the inner/outer lids at the edges to be easier to print with large diameter nozzles (e.g 0.8mm) - also removed the clips and notches that close the stock case since they had a tendency to break too easily when printed (but now the case needs screws to close) - changed the top cover air vent shape to a circular pattern, with screw holes that fit the size and spacing of the standard 40mm fan (best fit for M4x15 screws from inside the case) - added a conical hole to uncover the IR receiver photodiode (I don't use it myself, but why cover it if they bothered to put it there?) - widened the µSD slot and removed the complex shape (the orginal case is in injected ABS with tighter tolerances) - designed a new, better looking ODROID logo - the case is closed with 4 screws (autotapping M2x15 or longer) Of course the case can be used without a fan, with more room inside the air flow will be even better than with the original design! The 2 STL files are ready to be sliced, but if some of you wish to go further in modding, I also provide the stp file (please let me know, it's always nice to share new ideas)