Olight and Fossil Watch Stand
prusaprinters
<p>This is a design to charge both my EDC flashlight (an SRII Baton from Olight) and my watch (a Fossil Gen4).</p><p>I printed it in PLA on a Prusa i3 Mk3, with four walls. In order to build this, you will need to first install the charging puck for the watch into the holder. It is a friction fit. If it does not friction fit, a little hot glue underneath. This then slots into the base, and can be glue with more hot glue. </p><p>After the watch stand and base are glued, run the flashlight charger and glue in place with, you guessed it, more hot glue.</p><p>After using this for a little, I added a rubber foot with hot glue. It keeps the whole thing from sliding around.</p><p>Future improvement ideas:</p><ol><li>A PCB to connect all the cords into one outgoing cord.</li><li>A weighted base to further help with sliding.</li></ol><p> </p>
With this file you will be able to print Olight and Fossil Watch Stand with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Olight and Fossil Watch Stand.