OMT² - Hex Bed Leveling Tool (2.5mm - 1/10")

thingiverse

Specs : 1/4"(6.35mm) Hex compatible To use with a M3 (1/10") Allen key Description : This tool was, at first, created to level the hot bed of the FABtotum, which uses M3 screws. If you need to know "precisely" by how much of an angle you've turned that M3 (2.5mm - 1/10") screw, this tool is for you ;) This is just a tool head. If you need a handle or other tools for your bit holder, visit : http://www.thingiverse.com/thing:1381028 This tool comes in 3 flavours : Tight Basic Loose To know which one to pick, simply print this quick test : http://www.thingiverse.com/thing:1381733 Instructions to make : You may need to clean the hole by passing the Allen key a few times through it Some filing/sanding may be needed to ensure a perfect fit with the handle Instructions to use : Put the tool in the screw head Place yourself facing the 0 section of the tool Turn the screw until you face the the angle you wish to reach (in the right direction, use the arrows) That's it ... ^^ The photos show an early prototype, new photos will be available shortly Print Settings Printer: FABtotum Rafts: Yes Supports: Yes Resolution: 0.200mm Infill: 100% Notes: Raft and support are not mandatory but can be usefull to achieve the best precision/fit possible with the handle. Don't print too fast and wait for the print to cool down before handling then clean the print using an X-acto knife, a scalpel or the OMT Blade Holder ^^ http://www.thingiverse.com/thing:1359425 How I Designed This New tool bits will be released fairly often, follow me to be notified To know more about the OMT² Project :http://www.thingiverse.com/thing:1381028