Onewheel handle (only 4x phillips screws required)
thingiverse
Installation: https://youtu.be/MeH79P5U8gI No nuts and bolts required. Only equipment required is 4x standard screws you can get from Ikea. 4x : 3.5mm by 30mm phillips screws (round head) The models are adjusted to take classic screws, but be careful when screwing them in as using the wrong screw could pierce the tire! Printing instructions: - 35% octet infill. eSUN PLA+ - Both parts should be printed on the side as the models come to ensure the parts are very strong. - The mounting bracket should be printed without supports. - The main body should be printed with supports as shows in pictures. The side with the supports probably needs sandpaper to get proper smooth. I've tested a single side of the handle to hold 20kg with 2 screws, so with 4 it should be able to handle +40kg. The Onewheel is 12kg. My Onewheel has a layer of protective film so I had to scale the model to 103%.
With this file you will be able to print Onewheel handle (only 4x phillips screws required) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Onewheel handle (only 4x phillips screws required).