Open RC Truggy Niko Diff Housing Remix
prusaprinters
<p>This is a remix of the differential housing for Niko's version of the OpenRC Truggy. Clearance was added to the bearings and the pinion gear was pushed out 1mm. This allows the use of shims to dial it in, though shims are not needed if the power/speed is relatively low.</p> <h3>Print instructions</h3><h3>Category: Toys & Games Summary</h3> <p>This is a remix of the differential housing for Niko's version of the OpenRC Truggy. Clearance was added to the bearings and the pinion gear was pushed out 1mm. This allows the use of shims to dial it in, though shims are not needed if the power/speed is relatively low.</p> <h3> Print Settings</h3> <p><strong>Printer:</strong> AM8</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> .2</p> <p><strong>Infill:</strong> 25%</p> <p><strong>Notes:</strong></p> <p>Very minor supports needed.</p>
With this file you will be able to print Open RC Truggy Niko Diff Housing Remix with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Open RC Truggy Niko Diff Housing Remix.