OpenRC F1 Standard Rubber Tire Adapters

thingiverse

These are 3D printed adapters to allow the mounting of standard R/C F1 tires on the wheels from the original design. After printing the included tires with both TPU and NinjaFlex I decided that it needed real tires. Instructions: Print 6x "Tire_Adapter_Supported" and 2x "Tire_Adapter_Supported_Front_Inner". Print the original rear wheels as-is. Print the narrow front rims included in this post. This will allow you to use the narrower front tires that the normal F1 cars use. Remove the support rings. Press the adapters on both the inner and outer ends of the wheels and glue them with CA glue or similar. Fill the gap with a foam insert of your choice and mount up your new tires! The tires I used are: Sweep SW-F1FM 1/10 Formula 1 Front Tires V2 - Medium (2pcs with inserts)http://www.hobbyking.com/hobbyking/store/__65461__Sweep_SW_F1FM_1_10_Formula_1_Front_Tires_V2_Medium_2pcs_with_inserts_.html and Sweep SW-F1RM 1/10 Formula 1 Rear Tires V2 - Medium (2pcs with inserts)http://www.hobbyking.com/hobbyking/store/__65465__Sweep_SW_F1RM_1_10_Formula_1_Rear_Tires_V2_Medium_2pcs_with_inserts_.html