Orange Pi Zero 2 Buttons Minimal Case

thingiverse

 Yet another minimal case for a Orange Pi Zero. This case has two additional buttons which could be used for controlling something on the Orange Pi (for e.g. shutdown/reboot). The case itself tightly fits on around the board, so you might need to trim the 3D printing settings. As I have printed it with ABS, I had to print it with a scale of 100.5 %. In such way ABS shrinkage was taken into account. Print settings: black ABS, 0.2mm layer height, 40% infill, 0.4mm nozzle diameter. There might be some problems with bigger nozzle, as there are some thin walls, but by tweaking the printer's settings you should be fine with more or less any 3D printer. =================================================================== More information about the case and were I personally have used it (and how to use the buttons), could be found at my blog: [https://daumemo.com/orangepi-zero-power-reset-pushbuttons-and-a-3d-printed-case-part-2/](https://daumemo.com/orangepi-zero-power-reset-pushbuttons-and-a-3d-printed-case-part-2/) ===================================================================