Orbiter Extruder for Jubilee using Bolt on Rapido Hotend and LGX-Lite

thingiverse

To assemble the following is required, (1) E3D ToolChanger Tool Plate (2) short Dodge heatserts to attach blowers to mount. (1) 38mm PTFE tube. (4) M3 x 8mm socket heads to mount LGX Lite and wiring stanchion. (4) M3 Square Nuts, thin. (2) M3 Hex Nuts (6) M3 X 8mm countersunk screws to attach to E3D tool plate. (2) M3 x 20mm socket head screws to attach blowers to mount. (4) M3 X 16mm socket head screws to attach 30mm fan to nozzle shroud. Edit: added parking post, will need 5mm OD x 60mm pins for the parking posts, it's critical that the posts are not longer than 60mm. The set I got from grainger actually measured around 63mm so I ended up ordering the following from Amazon... https://www.amazon.com/gp/product/B07Y56YSWJ/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1 Print with preferred material