Original Prusa i3 MK3S+ Model Remix

prusaprinters

<p>Thanks Prusa for this awesome model!<br><a href="https://www.prusaprinters.org/prints/67178-original-prusa-i3-mk3s-gift-card">https://www.prusaprinters.org/prints/67178-original-prusa-i3-mk3s-gift-card</a><br>&nbsp;</p><p>I wanted to be able to print the parts in different colors and make it much larger.<br>So I scaled it up a lot and cut the parts into separate pieces based on color.<br>I used this <a href="https://www.prusaprinters.org/prints/107930-prusa-logo">https://www.prusaprinters.org/prints/107930-prusa-logo</a> for the Prusa logo.<br>I wanted it to be orange so it stands out.</p><p>There are 2 options for the print head:<br>"Black_Print_Head_With_Back.stl" is the easiest option. &nbsp;It has a back piece to hold it in place like the original.<br>"Black_Print_Head_Without_Back.stl" is harder to assemble. &nbsp;It doesn't need the back piece, but you have to slide the rods through it before glueing the rods to the X Axis.</p><p>All the parts are labeled according to the color they should be printed in.<br>You need the following colors / materials:<br>Black - PLA or PETG<br>Orange - PLA or PETG<br>Silver - PLA or PETG (I didn't have any silver so I used gray)<br>Black - Flex (For cables)</p><p>The following parts need glue:<br>Black_Controller_Knob.stl<br>Black_Controller_Lense.stl<br>Black_Motor.stl<br>Flex_Print_Head_Cable.stl<br>Flex_X_Cable.stl<br>Flex_Y_Cable.stl<br>Orange_Controller.stl<br>Orange_Logo.stl<br>Orange_Motor_Mounts.stl<br>Orange_X_Axis.stl<br>Orange_Z_Rod_Holders.stl<br>Silver_X_Rods.stl<br>Silver_Y_Rods.stl<br>Silver_Z_Rods.stl</p><p>The rest are snap-together like the original.</p><p>The X_Rods need a brim and the X_Axis needs supports.<br>&nbsp;</p><p>Happy printing!<br>&nbsp;</p>