Ortlieb QL3 to 10mm pipe adapter

thingiverse

This model allows you to adapt Ortlieb QL3 mount points on your bicycle's rack to mount a 10mm pipe as a mounting rail for other brands of bags. This is something I needed since my QL3 mounts on this Canyon Commuter were welded on, but it blocked other brands of bag from being able to clip on as the QL3 mounts stick out too far and prevent the clips from reaching the rack. To make this print, you'll need 2x M5 25mm bolts+nuts per QL3 adapter and of course the pipe you want to use as a rail. Recommend PETG at 30% infill. I used supports from base layer only when printing the side that has the recess for the M5 nut. There are two sides that are slightly different in this model so make sure you print one of each, not two of the same side!