Ortur Lasermaster 2 Feet Stands for Fixed Laser

thingiverse

The Fixed Focus model of the Ortur Lasermaster 2 needs to have its feet on the spoil board to allow the Z axis adjustment to have enough range of motion. The original design raised the whole frame by about 15mm making focus a problem for thin materials. Like the original, this design for brackets that screw into a spoil board and holds the laser cutter in place with no movement. The laser cutter simply slips into pace on all four feet and then they can each be secured with 2 wood or dry wall screws. This allows you to print a grid on the spoil board and have it be accurate even if you move your machine temporarily. The laser can be lifted directly off of the brackets if you need access to the workspace and can then be securely and snuggly put back down in the same spot. The print file contains two right and left feet which allow the hold down screws to be outside the frame of the laser engraver.