Outdoor Hue Switch V1

prusaprinters

<p>This model served me well for about 1.5 years outdoors in direct Sun light at 30+ C temperatures, heavy rain and freezing.</p><p>Printed in PETG at 0.20mm with a 0.40mm nozzle it is flexible enough to give you feedback of the button press and with a light enough colour filament you will even see the LED in the switch light up. The design can be printed multicolour (load holder-multicolor.stl and holder-text.stl together) or as a single colour/manual colour swap with holder.stl (see the 3mf as an example). &nbsp;Increasing the layer height might break water resistance since there might not be enough layers to guarantee a solid surface.</p><p>I put some electric tape on the sides to create a tight fit and in the hope to keep water out (it appears to work just great).</p><p>The screw holes are for 3mm screws (use the openscad file to customize if needed).</p><p>Even if the switch would fail every couple of years, you can get one for about 15 EUR, where real outdoor designs are easily 50+ EUR. Keep in mind that the Hue switch wasn't designed for outdoor use.</p>