Outdoor Shisha "Pocket Rocket"

thingiverse

Pocket Rocket shisha from a Sodastream plastic bottle I modeled the parts to convert a regular "clindrical" shape plastic Sodastream bottle into a nice compact functoinal rocket-style shisha. As its made almost entirely out of plastic, its the ideal way to have a nice little smoke outdoors or on festivals, where all glass items are prohibited. To complete this build, following parts are needed: - print all 3D files once - an old Sodastream bottle (the cylindrical shape ones, not the more cony ones) - 20cm of 15x1mm stainless steel tubing - one 1/2" hose connector (i chose a brass one from a faucet) - Shisha head and hose/mouthpiece - some kind of epoxy glue / CA glue assembly: -First, print all the 3D files above once. The decorative ring, as its name suggests, is just for decorative reasons and has no effect on functionality. I printedthe parts in black PLA wich gives an elegant look to it. Then you can sand off the sodastream branding and writing from the bottle with fine grit sandpaper (800 in my case). This is also just for the optical pleasing aesthetics of the build After that, drill a 15mm diam. hole in the side of the bottle 90mm from the top. Now you can put the hose connector through that hole from the inside and glue it in place. For added stability, glue the hose connection brace on from the outside. Make sure you give the glue plenty of time to dry as it releases fumes that are even more unhealthy to breathe in than the average tobacco ;) Now you can add the decorative Ring over the brace and secure it with some CA glue. Drill a 15mm diam, hole through the cap of the bottle and insert it into the rocket tip. Then press the stainless steel tube trough the rocket tip until about 2.5cm reach out on the top (it maybe necessary to drill through the plastic part with the same 15mm drill bit to reach a nice firm fit without breaking the plastic) Press on the rocket fin secktion to the bottom of the bottle For a more silent smoking experience, you can add the diffusor to the bottom of the tube. And finally, fill up the bootle with water, connect your shisha hose, prepare a head with your favourite tobacco and enjoy :) I hope you enjoy building this nice little shisha :) feel free to contact me if you have any suggestions for improvements