OZ - Scarecrow - 2X

thingiverse

Original Design Wizard of Oz Scarecrow - 2X (Double Size) Everything prints in the orientation of the models. Might want to use a brim to be safe. I printed at .12mm using Cura for slicing Thin Walls should be set to on. For Legs start with Black filament then Switch to Straw color at layer 55 Switch to Brown color at layer 65 Paint accents with Acrylic paint. Straw coming out of shirt (torso) cut with nippers then use hair dryer to heat and shape, paint straw after shaping with acrylic paint. Depending on how well your printer prints, the head might be a little loose, If it is, just put a bit of masking tape around the inside of the neck and that should do it. Also recommend putting a thin strip of masking tape on each of the arms and legs to allow for better posing.