P-47 Thunderbolt "Bubble top" 1200mm

cults3d

This replica of the P-47 Thunderbolt is designed for quick and easy construction and printed using a combination of regular PLA and lightweight PLA (LW-PLA). Designed to suit the 3548 900kv motor this model has a significant amount of power and is happy to cruise around at 40% power thanks to its lightweight yet sturdy construction. Utilizing up to 7 channels; Ailerons, Elevator, Flaps, Rudder,Throttle, Landing gear and Gear doors, this model is sure to turn some heads at the local flying field. A one-piece wing mounts to the fuselage with nylon bolts and the tail stabilizers are quickly removable in case of sustaining damage. Links to components used can be found on the last page of the user guide. BUILD OPTIONS: This model comes with different build options depending on your budget and desire for use of parts and components. Gear option 1: Wing “A” is designed to suit the E-FLITE 1200mm gear leg and 84 degree retract. Gear option 2: Wing “B” is designed to suit a cheaper gear leg using the E-FLITE 84 degree retract. Gear option 3: Wing “C” is designed to suit a cheaper gear leg using a standard 2.5kg 90 degree retract. LW-PLA Tail option: The stabilizers and control surfaces for the tail can be printed in LW-PLA, reducing the ballast weight required in the nose. TEST FILES available here: https://cults3d.com/en/3d-model/various/p-47-thunderbolt-bubble-top-1200mm-test-files Flight video: https://www.youtube.com/watch?v=H0Bz8x_pe2g This model is recommended for the pilots with intermediate level building and flying skills. Included with this file: Factory files for Simplify 3d STL files G-CODE files CURA Profiles for LW-PLA and regular PLA Detailed assembly manual and user guide Print settings guide for all parts part orientation images GENERAL SPECIFICATIONS WINGSPAN: 1200mm PRINT WEIGHT: 1600g FLYING WEIGHT: 2500g CENTER OF GRAVITY 60mm aft of L.E at wing root. (Marked with indentation) ELECTRICS MOTOR: 3548 900kv ESC: 60 amp (min) SERVOS: standard 9g BATTERY: 4500mah 4S 50c (420g) (or similar) MINIMUM PRINT VOLUME: 250X210X210 For any questions and assistance please email us at: aeroworks3d@outlook.com NOTE: All STL files need to enlarged to 1000% if using a program other than simplify3d.