P5 Muto II Wide-Angle Pinhole camera

prusaprinters

<p>This is a remix of Schlem's excellent Muto pinhole camera.</p> <p>While I loved the idea of the original, I was not too keen on how heavily it relies on tape for light-proofing. So I designed a new front for it. The hex plate now has a pretty solid light trap so that if tape is used, it's just for holding it if it ever comes loose.</p> <p>I also re-designed the shutter so that it's easier to operate.</p> <p>The pinhole is now held by a small retaining disk so that it's more secure than ever.</p> <p>I also changed the tripod mounts by a set of Manfrotto PL200 compatible quick release tripod plates. If you want to use a 1/4-20 screw instead, you can use the P5 Muto original parts.</p> <p>I printed the front plate with 20% infill.</p> <p>The hex plate was printed at 20% infill with a brim as the exterior baffle is not very wide.</p> <p>The shutter was printed at 20% infill.</p> <p>The retaining disk is printed at 20% infill with a brim as it tends to get loose on the glass plate.</p> <p>The parts fit together very tightly so a good de-burring and light sanding is required.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div> <p><strong>Resolution:</strong></p> <p>Standard 0.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>20%</p></div> <p><strong>Filament:</strong> AMZ3D PLA Black</p> </p></p> Category: Camera