P90/PS-90 CA compliant kit (stock+trigger blocks)

prusaprinters

<p>California compliant stock and forward grip blocks to make a P-90 compliant. The one in the pictures is a Ruger 10/22 in a High Tower Armory 10/22 P-90 stock kit. It should fit on an actual FN P90/PS90.</p> <p>(rimfires aren't considered an AW in CA so not required, just for demonstration purposes)</p> <p>The trigger blocks don't seem to stay on properly, so I'd add some Tesa tape or something to stabilize it a bit. Feel free to improve upon it.</p> <blockquote> <p>Print the left and right side of the thumb-hole stock blocks, and two copies of the trigger blocks.</p> </blockquote> <p>I'm using M-LOK screws</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div> <p><strong>Rafts:</strong></p> <p>Doesn't Matter</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Doesn't Matter</p></div> <p><strong>Resolution:</strong></p> <p>1mm</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>doesn't matter</p></div> <p><strong>Filament:</strong> Duramic 3D PLA+ Black</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Setting don't mater too much. The ones on my pictures were printed on their sides. You can print it vertically as that would make them stronger but they'll look a bit weird since they won't sit flush in the cavity. Flat for style, Vertical for strength.</p> Your choice. :) <h3>Post-Printing</h3> <h3>How I Designed This</h3> <p>Thanks to James Robbins for the paintball P90 model in grabCAD</p> </div></p></p></p> Category: Hobby