Palette+ Scroll Wheel Mount for Robo R2

thingiverse

I measured out the proper dimensions and created this scroll wheel mount for my Robo R2. I did not like the fact that without this mount, the scroll wheel is angled when you mount it on the R2. I wanted a stable, vertical mount without the angle on it. I created it in SolidWorks and made sure to include that file, in case anyone needs to modify it. I originally wanted to make it a rotating mount, but did not see the need. It should be 1.6" x 1.6" square. Because I used SolidWorks, when you import it into Simplify3D (or any other slicer), you need to scale it 100,000 times. I have no idea why this is, but I have to do this with every part I design in SolidWorks. The print settings in Simplify3D were: Filament = PLA (0.97 extrusion multiplier) Nozzle = 0.40 mm Layer height = 0.100 mm Speed = 50 mm/s Top/Bottom solid layers = 6 Outline perimeter shells = 3 Infill = 50% triangular (you can probably use 20% and it would be fine) Hotend Temp = 198 Bed Temp = 65 Cooling = 60% after first layer Also, I used 3M VHB double-sided tape to mount it on the R2. It's very thin, but very, very strong. This might also fit the Robo C2, but I don't know that for sure. I've never seen one up close.