Paper Towel Holder

thingiverse

This is a remix of a remix. I have made 2 main changes: 1. I have split the holder ends into 2 parts each that interlock together. This is to increase strength since there are no longer any big vertical sections that have to be printed. 2. Added a version that supports a smaller tube diameter. I found that some of the paper towel brands have a slightly smaller diameter tube (about 35mm instead of 40mm) which made it impossible to use. For both sizes, you'll need to print the following: - 1 x Paper_Towel_Holder-Tab_Plate.stl - 1 x Paper_Tower_Holder-Screw_Plate.stl - 1 x TowelPart4_fixed.stl (found on source project 4459689) - 1 x Endkappen.stl (found on source project 4459689) Then, decide if you want the 40 or 35mm diameter version. Honestly, I think it's better to go with the smaller regardless. **40 mm (larger diameter)** - 2 x Paper_Tower_Holder_End_40mm.stl - 1 x Endstücke.stl (found on source project 4459689) **35 mm (smaller diameter)** - 2 x Paper_Tower_Holder_End_35mm.stl - 1 x Paper_Towel_Holder-Endpiece_35mm.stl Assembly is fairly straight forward 1. Connect Tab_Plate to one end and Screw_Plate to the other 2. Follow rest of the instructions in project 4459689 **Paper towel holder with threaded rod for more stability** by Zefram_Cochrane (link on the sidebar). Optionally, add a dab of super glue or epoxy to notches where the two sections meet.