Parameterized Stadia Controller Phone Holder

thingiverse

Here's a parameterized phone holder for a Google Stadia controller. Click "Open In Customizer" above, punch in your phone dimensions and get printing! if Customizer isn't working, here are instructions to customize it yourself: 1. Download OpenSCAD (https://www.openscad.org/) 2. Download StadiaControllerPhoneHolder.scad and open it with OpenSCAD 3. Edit the numbers at the top of the file to match the dimensions of your phone (smartphoneWidth, smartphoneDepth) 4. Press F6 to render the detailed model 5. File > Export > Export as STL... 6. Save and print with your customized STL! Some notes: - I personally find 15 deg to be a comfortable angle, so that's the default in the scad file - feel free to set it to your personal preference. - Take multiple measurements of your phone (even at the corners where you might slide the phone in) and take the largest. I found out the hard way my phone's TPU case is 1mm thicker at the corners. - The STL generated may not slice well, and may need to be repaired - the quickest way I found was to do a cut in Slic3r at z=0, which causes the STL to be regened. - The USB port at the back and the hole for the Stadia button are the weakest points, so adding a modifier in your slicer to set infill to 100% around them could help with durability (optional). - Be careful putting on the clip around the controller - it might scratch the controller or break. Also, shout out to [@rcsivertsen](https://www.thingiverse.com/rcsivertsen) for his [Python STL to OpenSCAD](https://www.thingiverse.com/thing:850853) conversion script (so I could embed the clip STL):