Parametric BLTouch rear sensor mount

thingiverse

This is a remix of https://www.thingiverse.com/thing:2219963 to enable mounting a BLTouch sensor on the rear bearing of an Anet A8. I've included a customizer to allow users to set various features such as height, and many other parameters for any printer. The "Measured Height" parameter is used to calculate the correct height with the 8.3mm offset to the nozzle. Simply move the print nozzle so it touches the bed then measure the distance from the top mount screw hole (on the rear lower bearing) to the bed. Enter this in the "measured height" field and create. The mount also includes side clearance to work on new Anet A8's. Note that for this mount, a minimum mount to bed distance of at least 44.8mm is required (sensor height + 8.3), or it won't function properly. This mount utilizes 4 3x10mm bolts for both sensor and backplate mounting. Stock carriage settings: define X_PROBE_OFFSET_FROM_EXTRUDER 10 define Y_PROBE_OFFSET_FROM_EXTRUDER 53 define FRONT_PROBE_BED_POSITION 53